EN
Feature
1.Plug-and-play: services can be deployed by one click on the NMS, and on-site configuration is not required.
2.Remote diagnosis: Remote fault locating is implemented by the loop-line test of POTS ports, call emulation and PPPoE dialupemulati
3.Link monitoring: E2E link detection is achieved using 802.1ag Ethernet OAM.
4.High speed forwarding: 900 Mbit/s forwarding in the NAT scenario.
5.IPv6 Capability: support IPv6/IPv4 dual stack and DS-Lite.
| Product Description: | |
| Technical items | Descriptions |
| Model | HG8310M/HG8010H/EG8010H |
| Out Port contains | 1GE |
| WIFI signal | NO |
| Wireless gain | NO |
| USB | NO |
| LAN | 1*10/100/1000Mbps adaptive Ethernet ports, full/half duplex, RJ45 interface |
| TEL | NO |
| PPPOE | support |
| Firmware | English |
| Dimension/weight | 83mm*70mm*30mm/70g |
| Fiber port | 1 GPON/EPON/XPON interface, ingle-fiber, Downstream rate 2.5Gbps, Upstream rate 1.25Gbps |
| Wavelength | Tx 1310nm, Rx 1490nm |
| Fiber interface | SC/FC-UPC/APC Dual mode/Singal mode |
| RX sensitivity | >-28dBm (1490nm) |
| DC power | 12V 0.5A, external AC-DC power adapter |
| Button | Reset, power |
| Operation | Working temperature: -5- +55℃ working humidity:10-90%(non-condensation) |
| Storage | Storage temperature: -30℃- +60℃ storage humidity: 10-90%(non-condensation) |
12 24 48 72 144 Cores Outdoor GYTA Fiber Optic Cable
All Dielectric Self Supporting (ADSS) Fiber Optic Cable
GYXTW 4B1 6B1 8B1 12B1 GYXTW53 Fiber Optic Cable
Aerial Self Supported ASU Fiber Optic Cable
