AI 100 megabit 4+2 isolation POE switch

This AI 100M4+2POE switch features 410/100 Mbps POE enabled RJ45 portsand 2 up stream

10/100 Mbps RJ45 ports.It supports VLAN isolation with a single button press,and the POE can transm it over distances up to 250 meters.All ports support line- speed for warding at speeds up to 100Mbps.Additionally,all ports feature MDI/MDIX auto-switching,making it plug-and-play and easy to use without any setup.

This switch support spermanent POE and the POE watch dog feature.When the POE switch is activated,it provides continuous power to connected POE devices,such as cameras.The POE

watch dog automatically checks for device failures and restarts them if necessary.The switch complies with IEEE802.3af/at standards,and each POE port can supply up to 25.5 Wofnet work power.

Introduction

Characteristic

4 POE supported 10/100Mbps RJ45 ports, 2 upstream 10/100Mbps RJ45 ports,

10/100M rate adaptive, MDI/MDI-X adaptive, full/half-duplex adaptive,

Complete with LED indicator, power indicator,

LINK/ACT indicator,Support IEEE802.1d Spanning Tree (STP) protocol to make networking moreconvenient;
Supports one-click VLAN isolation, which can achieve 250 meters transmission;

Supports POE watchdog function, which can automatically detect whether the powerreceiving device is dead and restart the power receiving device automatically,

Support QoS to ensure the efficient operation of the network,

Support AC100~240V wide voltage input;

Support IEEE802.3x flow control, back pressure flow control;

The power of the whole machine is 65W.

The default end-to-end jacking method (1/2+,3/6-) is used for power supply,

Support wall mounting;

All ports support line speed switching and support the transmission of ultra-longpackets up to 2048 bytes;
Low power consumption chip is adopted, stable and reliable,

Double rib cooling without fan design;

Simple to use, plug and play, no setup required;

Supports POE power supply, supports lEEE802.3af/at, and provides up to 25.5Wnetwork power per port.

Qualification

protocol standard :	IEEE802.310Base-T IEEE802.3af IEEE802.3u 100Base-TX IEEE802.3at IEEE802.3x Flow control IEEE802.1d IEEE802.1pQoS Spanning Tree IEEE802.1q VLAN
Upper Couplet	Socket connector:RJ45 Transmission rate:10/100Mbps adaptive Cable type:UTP-5E or higher Transmission distance:100 meters
POE port:	Power supply method:terminal bridging method Power supply cell:1/2+,3/6- POE port characteristics:<30W POE port:with watchdog function Maximum power of the product:≤65W
performance specification:	Forwarding mode:store and forward Transmission mode:full-duplex/half-duplex adaptive MAC address table:2K Supports giant frames:2048 bytes Network delay:less than 150μs
functional switch :	100m:Normal mode,all ports can communicate with each other 250m:Isolation mode,ports 1-4 can transmit up to 250m,ports are isolated from each other and can communicate with the upstream port
source:	Power type:Built-in power Power input voltage:AC100V~240V 50/60Hz Machine power connector:pin-shaped socket Maximum power of POE single port:25.4W Machine power consumption:standby power consumption:less than or equal to 3W;whole machine power consumption:less than or equal to 65W
work environment :	Storage temperature:-40~70℃ Working temperature:-10~60℃ Working humidity:5%~90%no condensation Heat dissipation method:natural heat dissipation
physical construction:	Size:126x116x34mm Weight:0.5kg Color of the body:metal,black

More Products

Aerial Self Supported ASU Fiber Optic Cable
GYXTW 4B1 6B1 8B1 12B1 GYXTW53 Fiber Optic Cable
All Dielectric Self Supporting (ADSS) Fiber Optic Cable
Outdoor 12 24 48 72 144 Cores Outdoor GYTA Fiber Optic Cable

Get a Free Quote

POE

AI 100 megabit 4+2 isolation POE switch

Introduction

More Products

Get a Free Quote